This is the 75MHz Futaba 3PM-FS Pro Pistol Grip 3-Channel Synthesized Computer
Radio with the R303FHS Synthesized Receiver, FUTL7620.
Does not include servos or mounting hardware.

FEATURES: New design considers operability and weight balance
PLL synthesized system is easy to change the frequency just by
selecting a desired frequency on the transmitter screen.
LCD display and four edit keys for easy data setup
Two function groups- frequently used functions/ system functions
HRS Transmission Modulation (HRS) provides three times faster
response when used with digital servos
Fail Safe (on HRS mode only) returns servos to a neutral or preset
position in the event of interference or malfunction
R303FHS receiver instantly detects whether transmitter is in HRS or
FM mode
Ten model memory
Programmable switches and buttons, programmable mixing
Digital steering and throttle trims
Steering dual rates and steering speed
Steering/throttle exponential
ABS braking
Brake mixing
Steering, brake/throttle and 3rd channel End Point Adjustment
Charge jack for optional transmitter NiCds
Throttle acceleration
Racing timer
Condition 2 select
Tension adjustment function
Trigger stop function
High luminosity blue LED pilot lamp (can select brightness)

INCLUDES: 3PM-FS transmitter with synthesized module and antenna
R303FHS synthesized receiver, FUTL7620
Instruction manual
Battery box, FUTM1595
Switch harness, FUTM4350
Mini screwdriver
Warranty card

REQUIRES: Digital servos when used in HRS mode
8 AA cells or NT8F700B NiCd battery for tranmsitter
4 AA cells or NiCd pack for receiver

optional: Charger FUTM1830

SPECS Transmitter
Operating System: FM/PPM, HRS/FM
Transmitting Frequency: 75Mhz
Power Supply: 9.6V NiCd
Current Drain: 250 mA or less

Receiver: R303FHS
Length: 1.56" (39.5mm)
Width: 1.09" (27mm)
Height: 0.57" (14.5mm)
Weight: 0.60oz (17g)
Receiving Frequency: 75MHz (channels 61-90)
Intermediate Frequency: 455kHz
Power Supply: 6.0V (NiCd 5 cells)
Current Drain: Approx. 95mA

COMMENTS: This radio is sold without servos and REQUIRES DIGITAL SERVOS ONLY
and 6V when using an HRS receiver. Non-digital servos are fine on
PPM/FM.
For optional NiCd pack use either FUTM1463 or FUTM1440.
If you would like to use optional NiCds with your transmitter, we
recommend an assembled pack, not individual cells. If individual
NiCd cells are used the battery tray could be damaged during
charging.